Basic Electronics Diploma Question Paper Dec 2015 SECTION-A
Q1. Do as directed. 15×1=15
1.The turn on voltage of a Germanium diode is 0.3 V
2. A FET depend on the Variation of the Depletion layer width with Reverse voltage for its operation.
3.The output voltage waveform of CE amplifier is Out of Phase with its input
4.Draw the symbol of p-MOSFET.
5.A Zener diode is always operated in Zener Breakdown.
6. When pn junction is heavily doped, its breakdown voltage will Decreases.
7. Current amplification factor of CB is Ic/Ie.
8. The smaller the stability factor, the High will be the thermal stability of the
9. The meaning of hybrid is Intermixing of Two or more parameter
10 DC Load line gives the locus of Ic and Vce under dc Conditions.
SECTION-B
Q2. Attempt any five questions. 5×6=30
- Explain the need of Stabilization of the Operating Point ?
- Discuss the advantages of FET over Conventional Transister. Click Here
- What is fixed bias circuit? Draw and explain.
- Compare the forward volt ampere Characteristics of germanium and silicon diode with the help of a diagram
- Draw circuit of a Full Wave Bridge Rectifier and explain its working. Draw the output waveform. Video Solution Click Here
- Draw and explain the hybrid equivalent circuit of a transistor on CE Configuration
- Draw and explain Filter Circuits. Click Here
- What is Zener Diode? Explain its Applications ?
SECTION-C
Q3. Attempt any three questions. 3×10=30
- Draw and Explain the Common Base Configurations Characteristics of a Transister ?
- Explain construction and working principle of FET. Draw the neat diagram.
- Write note on PN Junction and its Difference between the n-type and p-type semiconductor.
- Draw the practical circuit of single stage transistor amplifier and state the function of each component.
- Write note on (i) LED (ii) DC Load Line (iii) Schottky Diode
BASIC ELECTRONICS 2nd Semester Exam
ECE/CSE/IT/0190/DEC 2015
Section a FILL IN THE BLANKS bASIC ELECTRONICS BE DEC 2015 paper
The turn on voltage of a Germanium diode is 0.3 V
A FET depend on the Variation of the Depletion layer width with Reverse voltage for its operation.
The output voltage waveform of CE amplifier is Out of Phase with its input.
Draw the symbol of p-MOSFET.
A Zener diode is always operated in Zener Breakdown.
When pn junction is heavily doped, its breakdown voltage will Decreases.
Current amplification factor of CB is Ic/Ie.
The smaller the stability factor, the High will be the thermal stability.
The meaning of hybrid is Intermixing of Two or more parameter
DC Load line gives the locus of Ic and Vce under dc Conditions.
Metal Oxide Filed Effect Transister
Basic Electronics PSBTE Diploma Solved Paper Dec 2015 .Download Previous Year Basic Electronics 2nd Sem Semester ECE ,CSE Question Paper Solution here
Section B : Basic ELECTRONICS BE PAPER DEC 2015 PAPER
- Explain the need of Stabilization of the Operating Point ?
- Discuss the advantages of FET over Conventional Transister.
- What is fixed bias circuit? Draw and explain.
- Compare the forward volt ampere Characteristics of germanium and silicon diode with the help of a diagram
- Draw circuit of a Full Wave Bridge Rectifier and explain its working. Draw the output waveform. Video Solution Click Here
- Draw and explain the hybrid equivalent circuit of a transistor on CE Configuration
- Draw and explain Filter Circuits. Click Here
- What is Zener Diode? Explain its Applications ?
What is Zener diode? Draw its symbol and characteristics
hybrid Parameter) of transistor
Temperature variations affect the operating point of a transistor
Phase reversal of output voltage with respect to input voltage in an Amplifier
Basic Electronics PSBTE Diploma Solved Paper May 2017 Solution Click Here
Section c solved bee paper
CE configuration of a Transistor Click Here